1.High temperature equipment for special heating process requirements at 450 °C
.Issued more than 15 years of world -class standards.
.Provides the most standard welding furnace requirements.
.Suitable for 95% of the welding furnace needs.
.Multi-temperature zone design, easier to set and adjust profile.
2.For the enhanced flow heater module, the impeller diameter is increased by 40%, and the PCB is covered with a thermal blanket to achieve the lowest TS value on the hardest board; It can reduce nitrogen consumption by up to 40%, balance the air flow and save nitrogen.
3.Heller provides dynamic 3 tiered system (Tier 1: OvenCPK, Tier 2 Process CPK, Tier 3 Product Traceability)enables customer to quickly improve product qualityand yield while reducing costs. And the additionalbenefits of automatic record keeping and recall providecustomers with the peace of mind that all processparameters are under control and within spec.
4.Proprietary software allows you to program exhaust draw to optimize energy consumption during the various production times — heavy, light or idle.
Energy savings of up to 10-20 have been realized!
5.Heller Reflow Oven MK3 Basic Models and Specifications
Consult
13338663718